MicroNet SP918BK Manuel d'utilisateur télécharger pdf (Page 6)

Introduction

y Antenna Connector

This round connection is standard Reverse SMA connector where any antenna

with Reverse SMA connector can connect to the Access Point.

y DC Adapter Port

Insert the power plug of the power adapter into this port.

y LAN Port

The Access Point’s LAN port is where you connect to your LAN’s network

devices.

y Reset

The Reset button allows you to do one of two things.

1) If problems occur with your Access Point, press the reset button with a

pencil tip (for less than 4 seconds) and the Access Point will re-boot itself,

keeping your original configurations.

2) If problems persist or you experience extreme problems or you forgot your

password, press the reset button for longer than 4 seconds and the Access

Point will reset itself to the factory default settings (warning: your original

configurations will be replaced with the factory default settings).

1 2 3 4 5 6 7 8 9 10 11 ... 45 46

Pas de commentaire

MicroNet SP918BK Manuel d'utilisateur Page 6