MicroNet SP1910 Manuel d'utilisateur télécharger pdf (Page 29)

In the above figure, 2 SP3367NLs are used to enlarge wireless signal coverage.

SP3367NL-2 is configured as a wireless bridge to establish a wireless bridge with

SP3367NL-1. SP3367NL-2, here, does not have the AP function, thus, PC3 and PC4 can

communicate with SP3367NL-2 and access Internet only through wired network adapters

instead of wireless ones.

Note: To use wireless bridge, you must disable wireless encryption.

Bridge Restrict：There are 3 options available: Enabled, Enabled (Scan) and Disabled.

Enabled: Select it to enable wireless bridge function. You need to know the MAC address

of a remote bridge and enter it manually. 4 MAC addresses of remote bridges can be

saved to simultaneously establish bridges with 4 APs.

Enabled (Scan): Select it to enable the wireless bridge function. In the meantime, system

will automatically scan MAC addresses of available wireless devices. See the figure below:

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 87 88

Pas de commentaire

MicroNet SP1910 Manuel d'utilisateur Page 29