MicroNet SP5004 Manuel d'utilisateur télécharger pdf (Page 14)

4. Power on the Gateway, wait for about

40 seconds to boot up completely

Note: If your applied the power to the Gateway already, you don’t get the boot up

message, type the root and press [Enter]

5. When Login: shows, enter root as

user name and no password as default,

press [Enter] to proceed

In the console mode, we use the Static IP address for the example, shows how to

change the Gateway network by [ifaddr] command.

usr/config$ ifaddr -ip 61.219.198.204 -mask 255.255.255.248 -gate 61.219.198.201

usr/config$ commit (to save the data changed)

usr/config$ reboot (restart the gateway to take changes effect)

After the Gateway restarted, you can use the ping command to verify the Internet

connection. For example: ping 168.95.1.1 or ping www.micronet.info

Note: In console mode, you can type [?], or [help] any time to check the all the

available commands. Refer to Chapter 6 for more details.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 85 86

Pas de commentaire

MicroNet SP5004 Manuel d'utilisateur Page 14