MicroNet Fibre to SAS/SATA II RAID Subsystem Manuel d'utilisateur télécharger pdf (Page 76)

Fibre to SAS/SATA II RAID Subsystem

User Manual

5.4 Physical Drive

Choose this option from the Main Menu to select a disk drive and to perform the

functions listed below.

5.4.1 Create Pass-Through Disk

A Pass-Through Disk is a disk drive not controlled by the internal RAID subsystem

firmware and thus cannot be a part of a Volume Set. A Pass-Through disk is a

separate and individual Raid Set. The disk is available to the host as an individual

disk. It is typically used on a system where the operating system is on a disk not

controlled by the RAID firmware.

To create pass-through disk, click on the Create Pass-Through link under the

Physical Drives main menu. The setting function screen appears.

Select the disk drive to be made as Pass-Through Disk and configure the Pass-

Through Disk attributes, such as the Cache Mode, Tagged Command Queuing, and

Fibre Channel/LUN Base/LUN for this volume.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 137 138

Pas de commentaire

MicroNet Fibre to SAS/SATA II RAID Subsystem Manuel d'utilisateur Page 76