MicroNet Fibre to SAS/SATA II RAID Subsystem Manuel d'utilisateur télécharger pdf (Page 158)

FIBRE-to-SAS/SATA RAID SUBSYSTEM

158

User Manual

6. Upgrade Expander Firmware

a. Click menu "Administration > Service Options > Controller Services >

Upgrade Controller >".

b. Select “All Files” in File Type option, then choose the expander firmware file

v389.s3r.

NOTE: Upgrading could take several minutes to complete. It is

recommended to stop all access to the system and it takes around

4 minutes to upgrade each expander on the background.

NOTE: .bin image file can be used only when upgrading the

Expander’s firmware via RS232 while .s3r image file can be used

only when upgrading the Expander’s firmware via proRAID

Manager.

c. Double check if the new Expander Firmware is already displayed in the

Expanders table in Monitoring Æ System Information.

7. Power off the RAID subsystem. Power on after several seconds.

8. Upgrade Controller Firmware to Web GUI version 1.30.

a. Click menu "Administration > Service Options > Controller Services >

Upgrade Controller >".

b. Warning message will be displayed. Click “Yes” to start upgrade process which

takes several minutes.

c. Select the controller firmware binary file (version 1.30).

d. When “Confirm Firmware Details” message box is displayed, select “Yes” to

confirm upgrade.

e. Upgrade process will start. Verify if new firmware 1.30 is downloaded

successfully.

1 2 ... 153 154 155 156 157 158 159 160

Pas de commentaire

MicroNet Fibre to SAS/SATA II RAID Subsystem Manuel d'utilisateur Page 158